Cutting your fret slots

The laser-cut Acrylic depth stop should be adjusted to cut a slot that is just slightly deeper than the tang of the frets Fret slots which are too deep weaken

Cutting your fret slots The Fret Slotting Miter Box accommodates fingerboards up to 10mm thick and 74mm wide, Made of aluminum, 305mm long, there are three mounting holes for attaching

The laser-cut Acrylic depth stop should be adjusted to cut a slot that is just slightly deeper than the tang of the frets Fret slots which are too deep weaken

lava slot The standard is mm for regular frets and mm for replacement frets You can use a carpenter's square to guide your fret saw (use the straight side of

The laser-cut Acrylic depth stop should be adjusted to cut a slot that is just slightly deeper than the tang of the frets Fret slots which are too deep weaken

fret slot width The jig sits over the fretboard blank The fret cutting saw just fits in the slots and the acrylic being 6mm thick should hold the saw square I

Description · Fret slot depth gauge tool, very useful to measure the depth of a slot before start freting · High Precision Laser cut Dimensions :